Having the disclaimer out of the way, I will take a toothpick, dip it in glue and push it into the screw hole. When it bottoms out I pull it out a smidgen and cut it off; then I repeat with another toothpick or what is left of the first one. Push them in with the tip of the screw, then drive the screw down. I do it most often wooden boat with the door hinges of our 115-year-old house and it is a permanent fix. The school offers adult and youth courses in woodworking, boatbuilding, and hand crafts. We are constantly adding new classes and working to meet the interests of the community while maintaining a focus on the crafts and traditions of the Hudson Valley.
Regular freshwater wash-downs can promote rot in decks and top timbers. It’s best to sluice decks regularly with salt water, which helps to prevent rot. If your time and budget don’t allow you to maintain brightwork, consider paint or oil instead.
When the transom’s thickness shrinks with drying, the plank ends can stand proud of the transom. It’s tempting to want to sand these projections off. But after several years of sanding plank ends flush with a dried-out transom face, critical planking material is eliminated, and splits develop at the fastening holes. The well-intended sanding has eliminated the “relish”—the all-important material between the plank-end fastenings and the ends of the planks.
Sätergläntan welcomes students from around the world and continues to be a wellspring of inspiration and learning. There will be a variety of evening gatherings and opportunities for sharing with all of the Swedish guests throughout the week and during the wooden boat Show. Each Coeur Custom wood boat is a unique work of art. Every handcrafted wood boat has a distinct personality. A true expression of the owner’s dreams, no two are the same.
A wooden sports boat with people on board rides on the sea…. On point 4, and this is what I do around the house. I don’t have a wooden boat so have no experience of how it would work there.
We met our guides early, which allowed us to be among the first on the river affording us the best opportunity to see more bald eagles than we could count and amazing view of the Tetons at sunrise. The chilly temperatures did not bother us as we were given warm wool blankets to sit on and wrap around ourselves. Jackson Hole Vintage Adventures offers a luxury experience in a beautiful outdoor setting.
The tool of choice for cleaning out old seams is a reefing hook made from the tang of an old file or a flat-head screwdriver. Using a propane torch, heat the tang or the screwdriver tip to red-hot. Then, bend the handle a little past 90 degrees and quench the hot metal in water. File the business end of the tool to the sectional shape of the seam. Judiciously placed in the seam and dragged along, such a tool is very effective at removing old cotton and compound. Adding caulking to a boat when it’s dry can damage the seams.
Because if the seams are open, dirt and sanding dust can work into them, and even good vacuuming doesn’t always clear them out. As the planks then swell after launching, their edges will encounter that accumulated crud. Chances are that a bit of stray sanding dust won’t hurt the seams after one year, but over a span of years its accumulation will restrict plank swelling and possibly cause leaks.