The lid latch takes some getting used to, and one must occasionally get down and visual with it in order to assure that it is secured. The latch is a two-part contraption that remains secured to the main box portion. Hooks on the latch and lid mate to secure the lid, while an articulating cam pivots to pull the lid and press the gasket tight. However, again, it occasionally takes a little fiddling to get it just right.
If the legion of similarly designed coolers still in active use after 30 or more years is any indication, this is a very durable design. This roto-molded cooler costs far less than the Yeti Tundra 65 but performs just as well in nearly every way. It’s almost indestructible, it has two drainage ports and replaceable parts, and it kept our ice frozen for 10 days. I began by removing the 4 screws that held on the lid of the cooler. With the lid temporarily removed, it won’t get in the way.The plug assembly on the cooler consists of a stem, a rubber washer and a nut on the outside. Simply unscrew the outside nut, push out the stem and pull out the washer.
I have a roll-around Coke cooler modeled after a 1938 machine. It had its own refrigeration system which cratered and was not repairable. I removed the refrigeration system in the base and used this general coleman camping chair idea to add a drain and convert it to an ice-based cooler. In the cooler box interior I used a long 3/8 brass nipple screwed to a coupling, with a large washer under the coupling to provide a base.
Soft coolers are available as low as $20 and as high as $70-$80. These simple soft-sided coolers are surprisingly resilient and should last for a few years without major issues. The major issues include water easily leaking out and a challenge in storing coleman camping chair as many cans as Coleman states that it can. You will enjoy a bump up in ice life and toughness with this cooler but it also comes with a bump up in the asking price. Plus, for the size, it is quite mobile thanks to the side handle and attached wheels.
Their ice chests are designed to last for many days and you can put them through the extremes that nature can throw at you and they will typically come out the other side unscathed. There are also some unique features exclusive to Yeti as well as some accessories that harness their power. But you will pay a very high asking price to enjoy this Yeti experience. The RTIC 65 has rope handles with a plastic tube for gripping and two rubber latches for holding the lid closed, mimicking the design of most other, comparable coolers. Start by putting the rubber washer that came on the cooler back in. Discard the stem as it will not be used.Next, screw the pipe nipple onto the ball valve.